Assoc. Prof. Kürşat Gültekin

Publication Network

Articles 30

1. Investigation of tribological performance of bio-based palm oil reinforced with oleic acid modified kaolin nanoparticles in cold rolling

ÖZAKIN B., Gültekin K., Aygur O.

APPLIED CLAY SCIENCE , vol.282, 2026 (SCI-Expanded, Scopus)

2. Enhanced mechanical performance of epoxy composites and bonded joints doped with intercalated and silane-modified micro/nano kaolin clay

Gültekin K., Özakın B.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , vol.202, 2026 (SCI-Expanded, Scopus)

3. Formulation optimization with structural, oxidative and thermal behaviors of castor oil-based nanolubricants reinforced with boron nitride and black cumin oil

Özakın B., Gültekin K., Uymaz S. E., Özakın A. N.

JOURNAL OF MOLECULAR LIQUIDS , vol.443, pp.1-16, 2026 (SCI-Expanded, Scopus)

4. Experimental evaluation of particle size effect on kaolin additive palm nanolubricants and determination of optimum production parameters using a multi-criteria decision-making method

Ozakin B., Gültekin K.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , 2025 (SCI-Expanded, Scopus)

5. Synergetic effect of hybrid surface treatment on the mechanical properties of adhesively bonded AA2024-T3 joints

Ozakin B., Gultekin K.

JOURNAL OF ADHESION , vol.101, no.8, pp.1033-1060, 2025 (SCI-Expanded, Scopus) Sustainable Development

6. Improvement of oxidation stability, hydrolytic stability and tribological properties of kaolin particles doped bio-based green palm oil

Ozakin B., Gültekin K., Yurdgulu H. I.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS , vol.712, 2025 (SCI-Expanded, Scopus)

7. Investigation of the Effect of Particle Size on Dispersion Stability and Viscosity in Kaolin Particles-Doped Bio-Based Palm Nanolubricants

Ozakin B., Gültekin K., Uğuz G.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.50, no.6, pp.4223-4241, 2025 (SCI-Expanded, Scopus)

8. AA2024-T3 alüminyum alaşımlarının soğuk haddeleme işleminde pürüzlülük transfer davranışının deneysel incelenmesi

ÖZAKIN B., GÜLTEKİN K.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , vol.16, no.1, pp.139-146, 2025 (TRDizin)

9. Material Selection for Metal Additive Manufacturing Using Multi-Criteria Decision Making Methods

Özakın B., Gültekin K.

International Journal of Engineering and Innovative Research , vol.6, pp.151-161, 2024 (Peer-Reviewed Journal)

10. Experimental Analysis of Adhesive Joints Bonded with Polylactic Acid Plates Produced with Different Printing Angles and Infill Ratios

GÜLTEKIN K., ÖZAKIN B., F. Y., Danışmaz E. D.

Karadeniz Fen Bilimleri Dergisi , vol.14, no.2, pp.789-801, 2024 (TRDizin)

11. Enhancement of saltwater ageing behavior of nanocomposites and lap joints with boron nanoparticles

Korkmaz Y., Cetin E., Gültekin K.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , vol.126, 2023 (SCI-Expanded, Scopus) Sustainable Development

12. Bor Karbür (B4C) Katkılı Epoksi Esaslı Nanokompozitlerin Çok Kriterli Karar Verme Yöntemleriyle Seçimi

Özakın B., Gültekin K., Çelik İ.

Karaelmas Fen ve Mühendislik Dergisi , vol.13, no.1, pp.35-41, 2023 (TRDizin)

13. Improving the mechanical performance of adhesively bonded CFRP composite joints exposed to harsh mediums with the reinforcement of boron nanostructures

Korkmaz Y., Gültekin K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.37, no.13, pp.1959-1982, 2023 (SCI-Expanded, Scopus)

14. The effect of boron nanoparticle reinforcement on the structural and mechanical performance of nanocomposites and bonded joints exposed to an acid environment

Gültekin K., Korkmaz Y.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , vol.118, 2022 (SCI-Expanded, Scopus)

15. Effect of UV irradiation on epoxy adhesives and adhesively bonded joints reinforced with BN and B4C nanoparticles

Korkmaz Y., Gültekin K.

POLYMER DEGRADATION AND STABILITY , vol.202, 2022 (SCI-Expanded, Scopus)

16. Improvement of structural, thermal and mechanical properties of epoxy composites and bonded joints exposed to water environment by incorporating boron nanoparticles

KORKMAZ Y., Gültekin K.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , vol.116, 2022 (SCI-Expanded, Scopus)

17. Comparison of the effect of modified and unmodified boron carbide (B4C) nanoparticles on the mechanical properties of structural adhesives

GÜLTEKİN K.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , vol.11, no.1, pp.198-206, 2022 (TRDizin)

18. Mechanical properties of aluminum bonded joints reinforced with functionalized boron nitride and boron carbide nanoparticles

Gültekin K., Yazici M. E.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , vol.236, no.1, pp.37-49, 2022 (SCI-Expanded, Scopus)

19. Effect of functionalized boron nanoparticles on the adhesively bonded single lap composite joints

Gültekin K., Yazici M. E.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.37, no.1, pp.175-191, 2022 (SCI-Expanded, Scopus, TRDizin)

20. Structural, thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

Gültekin K., Uğuz G., Topcu Y., ÖZEL A.

JOURNAL OF APPLIED POLYMER SCIENCE , vol.138, no.42, 2021 (SCI-Expanded, Scopus)

21. Improvements of the structural, thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Gültekin K., Uğuz G., ÖZEL A.

JOURNAL OF APPLIED POLYMER SCIENCE , vol.138, no.21, 2021 (SCI-Expanded, Scopus)

22. Effect of different surface preparation and roughness treatments applied to AA2024-T3 aluminum alloys in bonded joints

GÜLTEKİN K., Korkmaz Y.

Gümüşhane Üniversitesi Fen Bilimleri Dergisi , vol.11, no.4, pp.1269-1281, 2021 (TRDizin)

23. Investigation of mechanical and thermal properties of nanostructure-doped bulk nanocomposite adhesives

Akpinar I. A., GÜRSES A., Akpinar S., Gültekin K., AKBULUT H., ÖZEL A.

Journal of Adhesion , vol.94, no.11, pp.847-866, 2018 (SCI-Expanded, Scopus)

24. An experimental study on composite adhesives reinforced with different types of organo-clays

Akpinar I. A., Gültekin K., Akpinar S., GÜRSES A., ÖZEL A.

Journal of Adhesion , vol.94, no.2, pp.124-142, 2018 (SCI-Expanded, Scopus)

25. Research on strength of nanocomposite adhesively bonded composite joints

Akpinar I. A., Gültekin K., Akpinar S., AKBULUT H., ÖZEL A.

Composites Part B: Engineering , vol.126, pp.143-152, 2017 (SCI-Expanded, Scopus)

26. Effects of unbalance on the adhesively bonded composites-aluminium joints

Gültekin K., Akpinar S., ÖZEL A., Öner G. A.

Journal of Adhesion , vol.93, no.9, pp.674-687, 2017 (SCI-Expanded, Scopus)

27. Experimental analysis on the single-lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures

Akpinar I. A., Gültekin K., Akpinar S., AKBULUT H., ÖZEL A.

Composites Part B: Engineering , vol.110, pp.420-428, 2017 (SCI-Expanded, Scopus)

28. The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints

Gültekin K., Akpinar S., GÜRSES A., Eroglu Z., ÇAM S., AKBULUT H., et al.

Composites Part B: Engineering , vol.98, pp.362-369, 2016 (SCI-Expanded, Scopus)

29. The effect of moment and flexural rigidity of adherend on the strength of adhesively bonded single lap joints

Gültekin K., Akpinar S., ÖZEL A.

Journal of Adhesion , vol.91, no.8, pp.637-650, 2015 (SCI-Expanded, Scopus)

30. The effect of the adherend width on the strength of adhesively bonded single-lap joint: Experimental and numerical analysis

Gültekin K., Akpinar S., ÖZEL A.

Composites Part B: Engineering , vol.60, pp.736-745, 2014 (SCI-Expanded, Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences 37

1. Kaolin Kili Takviyeli Epoksi Yapıştırıcıların Tek Tesirli Yapısal Bağlantılardaki Mekanik Performansının Araştırılması

GÜLTEKİN K., ÖZAKIN B.

7th International Conference on Innovative Academic Studies, Konya, Turkey, 2 - 03 September 2025, pp.414-422, (Full Text)

2. Mikro ve Nano Boyutta Kaolin Katkılı Epoksi Kompozitlerin Mekanik Özelliklerinin İncelenmesi

GÜLTEKİN K., ÖZAKIN B.

8th International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 22 - 23 August 2025, pp.263-269, (Full Text)

3. Havacılık Sektörü İçin Çok Kriterli Karar Verme Yaklaşımıyla Epoksi Esaslı Yapıştırıcıların Seçimi

GÜLTEKİN K., ÖZAKIN B.

IV. Uluslararası Ankara Bilimsel Çalışmalar Kongresi, Ankara, Turkey, 08 August 2025, (Full Text)

4. Oleik Asitle Modifiye Edilen Bor Nitrür Nanopartikülleri Katkılı Hint Yağlayıcıların Dağılım Stabilitelerinin Araştırılması

ÖZAKIN B., GÜLTEKİN K., UYMAZ S. E.

ASES V. International Van Scientific Research Congress, Van, Turkey, 08 August 2025, (Full Text)

5. Palm Yağlayıcılara Eklenen Kaolin Nanopartiküllerinin Soğuk Haddeleme Performansına Etkisi

ÖZAKIN B., GÜLTEKİN K.

Internatıonal 8th Usbilim Health, Engıneerıng And Applıed Scıences Congress, Diyarbakır, Turkey, 26 - 28 November 2024, pp.91-101, (Full Text)

6. Nano grafen katkılı motor yağının dağılım stabilitesine polioksietilen sorbitan monooleat (tween-80) yüzey aktif maddesinin etkisi

ÖZKURT A., ÖZAKIN B., GÜLTEKİN K.

4th International Conference on Engineering, Natural and Social Sciences, Konya, Turkey, 22 - 23 October 2024, pp.367-371, (Full Text)

7. Investigation of oxidative stability behavior of kaolin nanoparticles doped bio-based palm lubricants

Özakın B., Gültekin K., Türköz Karakullukçu N.

International Conference on Engineering, Natural Sciences, and Technological Developments, Balıkesir, Turkey, 19 - 21 July 2024, pp.195-200, (Full Text)

8. Hidroklorik asit ortamında bor karbür katkılı epoksilerin sıvı emilim davranışlarının belirlenmesi

TIKNAZOĞLU E., GÜLTEKİN K., ÖZAKIN B.

3rd International Conference on Frontiers in Academic Research, Konya, Turkey, 15 - 17 June 2024, pp.226-232, (Full Text)

9. Kaolin partikülleri katkılı bitkisel esaslı palm yağlayıcıların dağılım stabilitesinin geliştirilmesi

ÖZAKIN B., GÜLTEKİN K.

3rd International Conference on Engineering, Natural and Social Sciences, Konya, Turkey, 16 - 17 May 2024, pp.646-651, (Full Text)

10. Bitkisel yağlayıcıların sürdürülebilirliği açısından kaolin mineralinin önemi

ÖZAKIN B., GÜLTEKİN K.

4th International Conference on Innovative Academic Studies, Konya, Turkey, 12 - 13 March 2024, pp.616-621, (Full Text)

11. Termoplastik PLA ve termoset karbon fiber plakalarla birleştirilmiş hibrit yapıştırma bağlantılarının mekanik özelliklerinin belirlenmesi

DANIŞMAZ E., GÜLTEKİN K., ÖZAKIN B.

4th International Conference on Innovative Academic Studies, Konya, Turkey, 12 - 13 March 2024, pp.270-277, (Full Text)

12. Kaolin nanopartikülleri katkılı bitkisel esaslı palm yağlayıcıların viskozite davranışlarının incelenmesi

ÖZAKIN B., GÜLTEKİN K.

Ases II. International Kayseri Scientific Research Conference, Kayseri, Turkey, 26 - 28 January 2024, pp.65-74, (Full Text)

13. Nanopartikül Katkısı ile Yapıştırma Bağlantılarının Korozif Ortamlardaki Davranışının Geliştirilmesi

KORKMAZ Y., GÜLTEKİN K.

3rd International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 20 - 23 July 2022, pp.956-962, (Full Text)

14. An Experimental Study on the Mechanical Performance of Nanostructures-Reinforced Structural Adhesively Bonded AA2024-T3 Joints in Seawater Medium

KORKMAZ Y., GÜLTEKİN K.

3rd International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 20 July 2022 - 23 July 2020, pp.1386, (Summary Text)

15. FT-IR Analysis of Nanocomposites Exposed to Different Environments

KORKMAZ Y., GÜLTEKİN K.

International Conference on Engineering Technologies (ICENTE21), Konya, Turkey, 18 - 20 November 2021, pp.117, (Summary Text)

16. Water Absorption of Modifıed Boron Nanoparticles Doped Epoxy Nanocomposites

KORKMAZ Y., GÜLTEKİN K.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 - 22 October 2021, pp.102-111, (Full Text)

17. Investıgatıon of the Mechanical Properties of Boron Nanoparticle Doped Adhesive Joints Exposed to Salt Water Environments

KORKMAZ Y., GÜLTEKİN K.

6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC21), Nevşehir, Turkey, 26 - 28 November 2021, pp.473, (Summary Text)

18. Functionalized CNTs Doped Nanocomposites: Structural, Thermal and Mechanical Properties

KORKMAZ Y., GÜLTEKİN K.

International Conference on Engineering Technologies (ICENTE21), Konya, Turkey, 18 - 20 November 2021, pp.120, (Summary Text)

19. Bor Nanopartiküllerinin Sülfürik Asit Ortamına Maruz Kalan Epoksi Polimerlerin Cam Geçiş Sıcaklığı Üzerine Etkisi

KORKMAZ Y., GÜLTEKİN K.

6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC21), Nevşehir, Turkey, 26 - 28 November 2021, pp.218-222, (Full Text)

20. Effect of Silan Modifıed Nano h-B4C Dispersion on Thermal Properties of Structural Epoxy Adhesives

KORKMAZ Y., GÜLTEKİN K., TOPCU Y.

6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC21), Nevşehir, Turkey, 26 - 28 November 2021, pp.474, (Summary Text)