Prof. Dr. Sermin Elevli

Yayın Ağı

Makaleler 39

1. A full factorial experimental design-based approach to determine hotel room pricing: The case of Antalya, Türkiye

Terzi Kumandaş M., Özdemir A., Elevli S.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.43, sa.1, ss.250-259, 2025 (ESCI, Scopus)

2. Atık Su Miktarının ARIMA ve Yapay Sinir Ağları ile Tahmini

Yıldız A., Elevli S., Odabaş M. S.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.25, sa.2, ss.360-370, 2025 (TRDizin)

3. A study of entrepreneur and innovative university index by entropy-based grey relational analysis and PROMETHEE

Elevli S., Elevli B.

SCIENTOMETRICS , cilt.129, sa.6, ss.3193-3223, 2024 (SCI-Expanded, SSCI, Scopus)

4. Niteliksel Ölçüler İçin Süreç Yeterlilik Analizi: Çağrı Merkezi Örneği

TERZİ KUMANDAŞ M., ELEVLİ S.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.23, sa.6, ss.1402-1411, 2023 (TRDizin)

5. HATA TÜRÜ VE ETKİLERİ ANALİZİNDE BULANIK SWARA YÖNTEMİNİN KULLANIMI: OTOMOTİV SEKTÖRÜ ÖRNEĞİ

BEYLİHAN E., ELEVLİ S.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.11, sa.1, ss.212-224, 2023 (TRDizin)

6. Lifetime Extension Approach for decreasing e-wastes

ELEVLİ S.

JOURNAL OF TURKISH OPERATIONS MANAGEMENT , cilt.6, ss.1230-1238, 2022 (TRDizin)

7. Fuzzy Measurement System Analysis Approach: A Case Study

BEYLİHAN E., ELEVLİ S.

Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , cilt.14, 2022 (TRDizin)

8. Prediction of medical waste generation using SVR, GM (1,1) and ARIMA models: a case study for megacity Istanbul

Ceylan Z., BULKAN S., Elevli S.

JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING , cilt.18, sa.2, ss.687-697, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

9. THE UTILISATION OF SPECIAL CAUSE CONTROL CHARTS IN THE PRESENCE OF AUTOCORRELATED DATA

Elevli S.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.38, sa.2, ss.787-793, 2020 (ESCI, Scopus)

10. QUALITY CONTROL CHARTS FOR MONITORING PERFORMANCE OF HOSPITAL CALL CENTER

Öztürk H., Murat N., Elevli S.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.37, sa.4, ss.1393-1406, 2019 (ESCI, Scopus)

11. Fault Tree Analysis for Fused Filament Fabrication Type Three-Dimensional Printers

Baş H., Elevli S., Yapıcı F.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.19, sa.5, ss.1389-1400, 2019 (ESCI, Scopus)

12. Comparison of regression and design models for biosorption process

Cetintas S., Elevli S., BİNGÖL D.

DESALINATION AND WATER TREATMENT , cilt.145, ss.107-119, 2019 (SCI-Expanded, Scopus)

13. Comparison of multiple regression analysis using dummy variables and a NARX network model: an example of a heavy metal adsorption process

BİNGÖL D., Xiyili H., Elevli S., Kılıç E., Cetintas S.

WATER AND ENVIRONMENT JOURNAL , sa.2, ss.186-196, 2018 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

14. Adsorption of lead and copper using waste foundry sand: statistical evaluation

GÜRKAN E. H., Çoruh S., Elevli S.

INTERNATIONAL JOURNAL OF GLOBAL WARMING , cilt.14, sa.2, ss.260-273, 2018 (SCI-Expanded, Scopus)

15. Optimization study of adsorption of crystal violet and congo red onto sepiolite and clinoptilolite

Coruh S., Elevli S., Dogan G.

GLOBAL NEST JOURNAL , cilt.19, sa.2, ss.336-343, 2017 (SCI-Expanded, Scopus)

16. Drinking water quality control: control charts for turbidity and pH

Elevli S., UZGÖREN N., BİNGÖL D., Elevli B.

JOURNAL OF WATER SANITATION AND HYGIENE FOR DEVELOPMENT , cilt.6, sa.4, ss.511-518, 2016 (SCI-Expanded, Scopus)

17. Karadeniz Bölgesinde Yıllara Göre Kredi Mevduat Oranlarındaki Değişkenliğin İncelenmesi

ÇELİKKOL M. M., ELEVLİ S.

Dumlupınar Üniversitesi Sosyal Bilimler Dergisi , 2016 (Hakemli Dergi)

18. An Integrated Approach in Optimization of Dye Adsorption onto Sepiolite

Geyikçi F., Elevli S., Kılıç E., Çoruh S.

PONTE , cilt.72, sa.2, ss.140-149, 2016 (Hakemli Dergi)

19. AN INTEGRATED APPROACH OF ARTIFICIAL NEURAL NETWORK ANN AND RESPONSE SURFACE METHODOLOGY RSM IN OPTIMIZATION OF DYE ADSORPTION ONTO SEPIOLITE

GEYİKÇİ F., ELEVLİ S., KILIÇ E., ÇORUH S.

PONTE International Scientific Researchs Journal , cilt.72, sa.2, 2016 (Hakemli Dergi)

20. MALACHITE GREEN DYE REMOVAL USING MONTMORILLONITECLAY FULL FACTORIAL DESIGN ANALYSIS

MESCİ OKTAY B., ELEVLİ S., ÇORUH S.

International Journal of Advances in Science Engineering and Technology , ss.13-17, 2016 (Hakemli Dergi)

21. OPTIMIZATION STUDY OF DYE REMOVAL BY CEMENT KILN DUST USING THE CENTRAL COMPOSITE DESIGN OF EXPERIMENTS

Coruh S., Elevli S.

GLOBAL NEST JOURNAL , cilt.17, sa.1, ss.93-102, 2015 (SCI-Expanded, Scopus)

22. A statistical analysis of GPS positioning using experimental design

ŞİŞMAN Y., Elevli S., Şişman A.

ACTA GEODAETICA ET GEOPHYSICA , sa.3, ss.343-355, 2014 (SCI-Expanded, Scopus)

23. OPTIMIZATION OF MALACHITE GREEN DYE REMOVAL BY SEPIOLITE CLAY USING A CENTRAL COMPOSITE DESIGN

Coruh S., Elevli S.

GLOBAL NEST JOURNAL , cilt.16, sa.2, ss.339-347, 2014 (SCI-Expanded, Scopus)

24. Experimental design of fuse link with ceramic alloy: Cracking problem

Sanyilmaz M., Elevli S.

HEMIJSKA INDUSTRIJA , cilt.68, sa.1, ss.35-41, 2014 (SCI-Expanded, Scopus)

25. CNC TEZGAHLARININ BAKIM VERİLERİNİN İSTATİSTİKSEL DEĞERLENDİRMESİ

ÖZTÜRK E., ELEVLİ S.

Dumlupınar Üniversitesi Sosyal Bilimler Dergisi , cilt.0, sa.EYİ 2013 Özel Sayısı, ss.351-364, 2014 (TRDizin)

26. Assessment of leaching characteristics of heavy metals from industrial leach waste

Çoruh S., Elevli S., Ergun O. N., Demir G.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING , cilt.123, ss.165-171, 2013 (SCI-Expanded, Scopus)

27. Recycling Of Chromite Waste for Concrete: Full Factorial Design Approach

Mesci B., Elevli S.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH , cilt.6, sa.1, ss.145-150, 2012 (SCI-Expanded, Scopus)

28. Multivariate statistics application in development of blast fragmentation charts for different rock formations in quarries

Elevli B., Topal I., Elevli S.

Acta Montanistica Slovaca , cilt.17, sa.4, ss.300-309, 2012 (SCI-Expanded, Scopus)

29. Statistical Evaluation and Optimization of Factors Affecting the Leaching Performance of Copper Flotation Waste

Çoruh S., Elevli S., Geyikçi F.

SCIENTIFIC WORLD JOURNAL , cilt.2012, 2012 (SCI-Expanded, Scopus)

30. Comparison of the results of response surface methodology and artificial neural network for the biosorption of lead using black cumin

BİNGÖL D., Hercan M., Elevli S., Kılıç E.

BIORESOURCE TECHNOLOGY , cilt.112, ss.111-115, 2012 (SCI-Expanded, Scopus)

31. Modelling of lead adsorption from industrial sludge leachate on red mud by using RSM and ANN

Geyikçi F., Kılıç E., Çoruh S., Elevli S.

CHEMICAL ENGINEERING JOURNAL , cilt.183, ss.53-59, 2012 (SCI-Expanded, Scopus)

32. ADSORPTION OF NEUTRAL RED DYE FROM AN AQUEOUS SOLUTION ONTO NATURAL SEPIOLITE USING FULL FACTORIAL DESIGN

Çoruh S., Geyikçi F., Elevli S.

CLAYS AND CLAY MINERALS , cilt.59, sa.6, ss.617-625, 2011 (SCI-Expanded, Scopus)

33. Adsorption of silver from aqueous solution onto fly ash and phosphogypsum using full factorial design

Çoruh S., Elevli S., Senel G., Ergun O. N.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY , cilt.30, sa.4, ss.609-619, 2011 (SCI-Expanded, Scopus)

34. Adsorption of copper and zinc ions on illite: Determination of the optimal conditions by the statistical design of experiments

Turan N. G., Elevli S., Mesci Oktay B.

APPLIED CLAY SCIENCE , cilt.52, sa.4, ss.392-399, 2011 (SCI-Expanded, Scopus)

35. Dragline maintenance data analysis using logarithmic scatterplot

Elevli S., Uysal O., ERDEM B.

International Journal of COMADEM , cilt.14, sa.1, ss.11-17, 2011 (Scopus)

36. NONHOMOGENEOUS POISSON PROCESS: RELIABILITY ANALYSIS OF A MINING EQUIPMENT

UZGÖREN N., Elevli S.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.25, sa.4, ss.827-837, 2010 (SCI-Expanded, Scopus, TRDizin)

37. RELIABILITY ANALYSIS OF DRAGLINES' MECHANICAL FAILURES

UZGÖREN N., UYSAL Ö., Elevli S., Elevli B.

EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY , cilt.48, sa.4, ss.23-28, 2010 (SCI-Expanded, Scopus)

38. Failure Mode and Effects Analysis for a Quarry in Kutahya Turkey

ELEVLİ S., UYSAL Ö., ELEVLİ B.

CIM Bulletin , cilt.100, sa.1099, ss.28-33, 2007 (Hakemli Dergi)

39. Sivas kent merkezi haftalık SO2 kirlilik haritasının çıkarılmasında jeoistatistiksel yöntemin kullanılması

ELEVLİ B., ELEVLİ S., Çoşkuner G.

TURKISH JOURNAL OF ENGINEERING AND ENVIRONMENTAL SCIENCES , ss.87-92, 1996 (TRDizin)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 34

1. “ERGONOMİK OLMAYAN ÇALIŞMAKOŞULLARINA BAĞLI KAS İSKELET SİSTEMİ ŞİKÂYETLERİ: DİŞHEKİMLERİ ÖRNEĞİ”

TERZİ Ö., ARSLAN H. N., ELEVLİ S.

25. Ulusal Ergonomi Kongresi, Samsun, Türkiye, 18 - 20 Ekim 2019, (Özet Bildiri)

2. Ergonomik Olmayan Çalışma Koşullarına Bağlı Kas Iskelet Sistemi Şikâyetleri: Diş Hekimleri Örneği.

TERZİ Ö., Arslan H. N., ELEVLİ S.

25. Ulusal Ergonomi Kongresi, Samsun, Türkiye, 18 - 20 Ekim 2019, (Özet Bildiri)

3. Forecasting Call Volume of a Call Center Using Multiple Linear Regression Analysis and NARX Network Model

ELEVLİ S., ÖZTÜRK H.

2nd International Conference on Agriculture, Technology, Engineering and Sciences (ICATES), Lviv, Ukrayna, 20 Eylül 2020 - 20 Eylül 2019, (Özet Bildiri)

4. Optimization of Neural Networks with Response Surface Methodology: Prediction of Cigarette Pressure Drop

Midilli Y. E., Elevli S.

60th International Scientific Conference on Information Technology and Management Science of Riga-Technical-University (ITMS), Riga, Letonya, 10 - 11 Ekim 2019, (Tam Metin Bildiri)

5. Selecting the Departments for Moving to the Faculty of Engineering Annex

ÇALIŞ BOYACI A., ELEVLİ S.

International Technological Sciences and Design Symposium, 27 - 29 Haziran 2018, (Özet Bildiri)

6. Çalışanlarda Zorlanmaya Neden Olan Duruşların Reba Yöntemi İle Ergonomik Analizi

SÖNMEZ H. A., ÖZTÜRK H., BAŞ H., ELEVLİ S.

24. Ulusal Ergonomi Kongresi, Türkiye, 28 - 30 Eylül 2018, (Özet Bildiri)

7. Implementation of 5s in Boiler Manufacturing Industry

ELEVLİ S., ÖZTÜRK H., BAŞ H., ELEVLİ B., FURUGİ A.

1st International Technology Sciences and Desing Symposium (ITESDES), Giresun, Türkiye, 27 - 29 Haziran 2018, ss.413, (Özet Bildiri)

8. Critical Chain Method As A Different Approach To Project Management: An Application

Beylihan E., Elevli S.

1st International Technology Sciences and Desing Symposium (ITESDES), Giresun, Türkiye, 27 Haziran 2018, ss.1-10, (Özet Bildiri)

9. COMPARISON OF FUNDAMENTAL MACHINE LEARNING ALGORITHMS ON EVALUATION STUDENT SURVEY

PEKEL E., ELEVLİ S.

1st International Conference on Computational and Statistical Methods in Applied Sciences, 9 - 11 Kasım 2017, (Özet Bildiri)

10. Comparative Study of Regression and Different Multivariate Optimization Models for Cu(II) Ions Adsorption onto Date Palm (Phoenix Davtylifera L.) Seeds

Çetintaş S., CERRAHOĞLU E., ELEVLİ S., BİNGÖL D.

International Conference on Technology, Engineering and Science, Antalya, Türkiye, 26 - 29 Ekim 2017, ss.28, (Özet Bildiri)

11. Comparative Study of Regression and Different Multivariate Optimization Models for Cu(II) Ions Adsorption onto Date Palm (Phoenix dactylifera L.) Seeds

ÇETİNTAŞ S., CERRAHOĞLU E., ELEVLİ S., BİNGÖL D.

ICONTES, 26 Ekim - 29 Aralık 2017, (Özet Bildiri)

12. Evaluating the effects of lean production techniques on the stress levels of the employees via structural equality modeling with an application in textile sector

MURAT N., ELEVLİ S.

2nd INTERNATIONAL CONFERENCE ON ECONOMICS BUSINESS MANAGEMENT AND SOCIAL SCIENCES, 10 - 14 Mayıs 2017, (Özet Bildiri)

13. SIMULATION OF FACILITY LAYOUT FORGLASS PROCESSING PLANT BYUSING WINQSB

ELEVLİ B., ELEVLİ S., kavaz b.

2nd INTERNATIONAL CONFERENCE ON ECONOMICS BUSINESS MANAGEMENTAND SOCIAL SCIENCES, 10 - 14 Mayıs 2017, (Özet Bildiri)

14. The Evaluation of Manufacturing Machines Based on Fuzzy AHP Integrated Fuzzy TOPSIS

PEKEL E., ELEVLİ S.

2nd International Conference on Economics Business Management and Social Sciences- ICEBSS, 10 - 14 Mayıs 2017, (Özet Bildiri)

15. Evaluation of Engineerıng Students’ Learning Outcomes Using Statistical Quality Control Charts

ELEVLİ S., ELEVLİ B.

2nd International Conference on Economics Business Management and Social Sciences- ICEBSS, 10 - 14 Mayıs 2017, (Özet Bildiri)

16. Theory of Constraints with Simulation Modeling: Case Study

PEKEL E., ölçerler g., demirel r., ELEVLİ S.

2nd International Conference on Economics Business Management and Social Sciences- ICEBSS, 10 - 14 Mayıs 2017, (Özet Bildiri)

17. Analyzing Final Exam Scores of Engineering Economics Using Quality Control Charts

ELEVLİ S., MURAT N., ELEVLİ B., ÖZTÜRK H.

2nd International Conference on Economics Business Management and Social Sciences- ICEBSS, Belgrade, Sırbistan, 10 - 14 Mayıs 2017, (Özet Bildiri)

18. Malachite Green Dye Removal Using Montmorillonite Clay Full Factorial Design Analysis

MESCİ OKTAY B., ELEVLİ S., ÇORUH S.

International Conference on Environmental Science and Development (ICESD), 7th-8th July, Oslo, Norway, 2016, 18 Temmuz 2916 - 20 Temmuz 2016, (Tam Metin Bildiri)

19. Monitoring Loan to Deposit Ratios LTD of Aegean Region by Quality Control Charts

ÇELİKKOL M. M., ELEVLİ S.

Academics World 34th International Conference (International Conference on Science, social Science and Economics), 07 Temmuz 2016, (Tam Metin Bildiri)